IEI Integration KINO-QM57A - Manual (Page 54)

KINO-QM57A Mini-ITX SBC
Page 40
3.3.2 Ethernet Connector
CN Label: LAN1 and LAN2
CN Type: RJ-45
CN Location: See
6
Figure 3-22
CN Pinouts: See
6
Table 3-24
The KINO-QM57A is equipped with two built-in RJ-45 Ethernet controllers. Each controller
can connect to the LAN through one RJ-45 LAN connector.
PIN DESCRIPTION PIN DESCRIPTION
1 CT1 6 MDI2+
2 MDI0+ 7 MDI2-
3 MDI0- 8 MDI3+
4 MDI1+ 9 MDI3-
5 MDI1- 10 GND
Table 3-24: LAN Pinouts
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the speed. See
6
Table
3-25.
Activity/Link LED Speed LED
STATUS DESCRIPTION STATUS DESCRIPTION
Off No link Off 10 Mbps connection
Yellow Linked Green 100 Mbps connection
Blinking TX/RX activity Orange 1 Gbps connection
Table 3-25: RJ-45 Ethernet Connector LEDs