IEI Integration KINO-QM57A User Manual
Page 66
Advertising
KINO-QM57A Mini-ITX SBC
Page 52
Figure 4-3: Cooling Kit Support Bracket
Step 2:
Open the lever at the top of the heat sink. Lift the lever at the top of the
cooling kit to loosen the cooling kit clamps.
Step 3:
Secure the cooling kit. Gently place the heat sink and cooling kit onto the CPU.
Make sure the hooks are properly secured to the bracket. To secure the cooling
kit, close the top lever.
Step 4:
Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the KINO-QM57A. Carefully route the cable and avoid heat generating chips
and fan blades.
Step 0:
Advertising