IEI Integration KINO-QM670 v2.01 - Manual (Page 102)

KINO-QM670 Mini-ITX SBC
Page 87
5.3.6.1.3 Serial Port 2 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt
address are automatically detected.
Î
IO=3E8h; IRQ=7 Serial Port I/O port address is 3E8h and the
interrupt address is IRQ7
Î
IO=3F8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
Î
IO=2F8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12
Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
Î
IO=3E8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
Î
IO=2E8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
Î
IO=2E0h; IRQ=3,
4, 5, 6, 7, 10, 11, 12
Serial Port I/O port address is 2E0h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
Î
IO=2F0h; IRQ=3,
4, 5, 6, 7, 10, 11, 12
Serial Port I/O port address is 2F0h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
Î Device Mode [RS422/RS485]
The Device Mode option enables RS-422/RS-485 serial port mode.