IEI Integration KINO-QM670 v2.01 - Manual (Page 124)

KINO-QM670 Mini-ITX SBC
Page 109
A.1 Intel
®
AMT Setup Procedure
The KINO-QM670 is featured with the Intel® Active Management Technology (AMT) 7.0.
To enable the Intel® AMT function, follow the steps below.
Step 1: Make sure the DIMM1 socket is installed with one DDR3 SO-DIMM.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN2_USB2.
Step 3: The UEFI BIOS options regarding the Intel® ME or Intel® AMT must be enabled
using the ME Configuration [BIOS Chipset menu]
Step 4: Configure the Intel® Management Engine BIOS extension (MEBx) (see
Section A.2 below)
Step 5: The following dialog window is displayed after the OS is loaded to show the
Intel® AMT status on the KINO-QM670 is enabled. S te p 0 :
Figure A-1: Intel® Active Management Technology Status Dialog
A.2 Intel
®
Management Engine BIOS Extension
This section describes the essential steps for using the Intel® Management Engine BIOS
extension (MEBx).
Step 1: A screen prompts the user to press <Ctrl+P> after a single beep during boot-up
process. To get into the Intel® MEBx settings, press <Ctrl+P>.
Step 2: Enter the Intel® ME password as it requires (Figure A-2). Enter the Intel®
default password: admin.