IEI Integration KINO-QM670 v2.01 - Manual (Page 81)

KINO-QM670 Mini-ITX SBC
Page 66
Figure 4-15: Dual RS-232 Cable Installation
Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis. Step 0:
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ Audio devices
ƒ HDMI devices
ƒ RJ-45 Ethernet cable connectors
ƒ RS-232 serial port
ƒ USB devices
ƒ VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding KINO-QM670 external peripheral interface connector making
sure the pins are properly aligned.