IEI Integration KINO-QM670 v2.01 - Manual (Page 74)

KINO-QM670 Mini-ITX SBC
Page 59
4.5.4 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and KINO-QM670 may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header (1x3)
Jumper Settings: See Table 4-5
Jumper Location: See Figure 4-9
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set. The
jumper sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in Table 4-5.
LCD Voltage Select Description
Short 1-2 +3.3V LVDS
Short 2-3 +5V LVDS
Table 4-5: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 4-9.