IEI Integration KINO-QM670 v2.01 - Manual (Page 109)

KINO-QM670 Mini-ITX SBC
Page 94
Î Terminal Type [VT-UTF8]
Use the Terminal Type option to specify the remote terminal type.
Î
VT100 The target terminal type is VT100
Î
VT100+ The target terminal type is VT100+
Î
VT-UTF8 D EFAULT The target terminal type is VT-UTF8
Î
ANSI The target terminal type is ANSI
Î Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.
Î
9600 Sets the serial port transmission speed at 9600.
Î
19200 Sets the serial port transmission speed at 19200.
Î
57600 Sets the serial port transmission speed at 57600.
Î
115200 D EFAULT Sets the serial port transmission speed at 115200.
Î Flow Control [None]
Use the Flow Control option to configure the flow control function.
Î
None Disables flow control.
Î
Hardware
RTS/CTS
Enables Hardware RTS/CTS flow control.
Î
Software
Xon/Xoff
Enables Software Xon/Xoff flow control.