IEI Integration KINO-QM670 v2.01 - Manual (Page 83)

KINO-QM670 Mini-ITX SBC
Page 68
external USB devices. Follow the steps below to connect USB devices and LAN cable to
the KINO-QM670.
Step 1: Locate the RJ-45 and USB connectors. The locations of the RJ-45 and USB
connectors are shown in Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-QM670.
Figure 4-17: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. See
7
Figure 4-17.
Step 4: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
7
Figure
4-17.