IEI Integration IMBA-9454 v1.00 - Manual (Page 122)

IMBA-9454 Motherboard
Page 104
5.7.6 VGA Monitor Connection
The IMBA-9454 has a single female DB-15 connector on the external peripheral interface
panel for a VGA monitor. Follow the steps below to connect a VGA monitor to the
IMBA-9454.
Step 1: Locate the DB-15 connector. The location of the DB-15 connector is shown in
Chapter 3.
Step 2: Insert the VGA connector. Insert the DB-15 connector of a VGA monitor into
the DB-15 connector on the external peripheral interface. See Figure 5-19.
Figure 5-19: VGA Connector
Step 3: Secure the connector. Secure the VGA connector to the external interface by
tightening the two retention screws on either side of the connector. Step 0: