IEI Integration IMBA-9454 v1.00 - Manual (Page 98)

IMBA-9454 Motherboard
Page 80
5.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
IMBA-9454 may result in permanent damage to the IMBA-9454 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IMBA-9454. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IMBA-9454, or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the IMBA-9454, place it on an
antic-static pad. This reduces the possibility of ESD damage.
Only handle the edges of the PCB: When handling the PCB, hold it by its
edges.