IEI Integration IMBA-9454 v1.00 - Manual (Page 132)

IMBA-9454 Motherboard
Page 114
storage devices. Some legacy OS do not support this
mode.
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE D EFAULT Configures SATA devices as normal IDE device.
Configure SATA Channels [Behind PATA]
Use the Configure SATA Channels option to determine how SATA channels and PATA
channels are ordered.
Before PATA Puts SATA channels before PATA channels.
Behind PATA D EFAULT Puts SATA channels behind PATA channels.
IDE 0 (Master) and IDE 1 (Slave)
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE 0 (Master)
Primary IDE 1 (Slave)
Third IDE 0 (Master)
Third IDE 1 (Slave)
Fourth IDE 0 (Master)
Fourth IDE 1 (Slave)
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.