IEI Integration IMBA-G410 v1.01 - Manual (Page 107)

2011/8/172011/8/17
IMBA-G410 ATX Motherboard
Page 93
Disable Wake event not generated by PCI PME controller
activity
Resume By PCIE-PME [Enable]
Use the Resume By PCI-PME BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.
Enable D EFAULT Wake event generated by PCIe PME controller activity
Disable Wake event not generated by PCIe PME controller
activity
Power On By Ring [Enable]
Use the Power On By Ring option to enable the system to be roused from a suspended
or standby state when there is activity on the RI (ring in) modem line. That is, the system is
roused by an incoming call on a modem.
Enable D EFAULT Wake event generated by an incoming call
Disable Wake event not generated by an incoming call
Power On By RTC Alarm [Disable]
Use the Power On By RTC Alarm option to specify the time the system should be roused
from a suspended state.
Enable If selected, the following appears with values that
can be selected:
RTC Day
RTC Hour
RTC Minute
RTC Second
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.