IEI Integration IMBA-G410 v1.01 - Manual (Page 73)

2011/8/172011/8/17
IMBA-G410 ATX Motherboard
Page 59
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See
66
Figure 4-18.
Figure 4-18: PS/2 Keyboard/Mouse Connector
4.6.3 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IMBA-G410. See
66
Figure 4-19.