IEI Integration IMBA-G410 v1.01 - Manual (Page 64)

508/17/2011158
Page 50
IMBA-G410 ATX Motherboard
Jumper Location: See Figure 4-8
The AT Power Select jumper specifies the systems power mode as AT or ATX.
Setting Description
Short Use AT power (Default)
Open Use ATX power
Table 4-2: AT/ATX Power Select Jumper Settings
Figure 4-8: AT/ATX Power Select Jumper Location
4.4.2 Clear CMOS Jumper
Jumper Label: JP1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-3
Jumper Location: See Figure 4-9
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
and then move back to the default position.
Pin Description
Short 1-2 Normal (Default)
Short 2-3 Clear BIOS
Table 4-3: Clear BIOS Jumper Settings