6 external peripheral interface connection, 1 audio connector, Xternal – IEI Integration IMBA-G410 v1.01 User Manual
Page 71: Eripheral, Nterface, Onnection, Figure 4-16: dual rs-232 cable installation, D refer to, Figure 4-7, Figure 4-7: dimm installation
2011/8/172011/8/17
IMBA-G410 ATX Motherboard
Page 57
Figure 4-16: Dual RS-232 Cable Installation
Step 3:
Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis.
Step 0:
4.6 External Peripheral Interface Connection
This section describes connecting devices to the external connectors on the IMBA-G410.
4.6.1 Audio Connector
The audio jacks on the external audio connector enable the IMBA-G410 to be connected
to a stereo sound setup. To install the audio devices, follow the steps below.
Step 1:
Identify the audio plugs. The plugs on your home theater system or speakers
may not match the colors on the rear panel. If audio plugs are plugged into the
wrong jacks, sound quality will be very bad.