IEI Integration IMBA-G410 v1.01 - Manual (Page 38)

248/17/2011158
Page 24
IMBA-G410 ATX Motherboard
3.2.8 Infrared Interface Connector
CN Label: IR1
CN Type: 5-pin header (1x5)
CN Location: See Figure 3-9
CN Pinouts: See Table 3-11
The infrared connector attaches to an infrared receiver for use with remote controls.
Figure 3-9: Infrared Connector Location
Pin Description
1 +5V
2 NC
3 IR-RX
4 GND
5 IR-TX
Table 3-11: Infrared Connector Pinouts
3.2.9 Memory Slots
CN Label: DIMM1, DIMM2
CN Type: DIMM slot
CN Location: See Figure 3-10
The DIMM slots are for DDR3 DIMM memory modules.