IEI Integration IMBA-G410 v1.01 - Manual (Page 98)

848/17/2011158
Page 84
IMBA-G410 ATX Motherboard
BYOSOFT BIOS Setup Utility
Advanced Chipset Features
Memory Hole
<Disable>
Initiate Graphic Adapter <Onboard/PCIE>
Pre Allocated Memory <32M>
Total GFX Memory <256M>
Boot Display Output Device <VBIOS>
Item
Help
___________________
Memory Hole
↑ ↓=Move Highlight <Enter>=Select Entry F10=Save Esc=Exit Without Save
F1=Scroll Help F9=Reset to Defaults
BIOS Menu 8: Advanced Chipset Features
Memory Hole [Disable]
Use the Memory Hole option to reserve memory space for ISA expansion cards that
require a specified area of memory to work properly. If an older ISA expansion card is
used, please refer to the documentation that came with the card to see if it is necessary to
reserve the space.
Enable Memory is reserved for ISA expansion cards
Disable D EFAULT Memory is not reserved for ISA expansion cards
Initiate Graphic Adapter [Onboard/PCIE]
Use the Initiate Graphic Adapter option to select the graphics controller used as the
primary boot device. Configuration options are listed below:
PCI/PCIE
PCIE/Onboard
Onboard/PCIE D EFAULT
PCI/Onboard