IEI Integration IMBA-G410 v1.01 - Manual (Page 135)

2011/8/172011/8/17
IMBA-G410 ATX Motherboard
Page 121
Figure C-14: Select a Local Source Drive
Step 6: Select a source partition (Part 1) from basic drive as shown in
77
Figure C-15.
Then click OK.
Figure C-15: Select a Source Partition from Basic Drive
Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(
77
Figure C-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .