IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 133)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 120
Step 8:
Step 9: The recovery tool menu appears. (Figure B-25)
Figure B-25: Recovery Tool Menu
Step 10: Create a factory default image. Follow Step 2 ~ Step 12 described in Section
B.2.5 to create a factory default image. S te p 0 :
B.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.