IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 63)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 50
Setting Description
Open Slave
Closed Master
Table 4-7: CompactFlash® Setup Jumper Settings
Figure 4-7: CompactFlash® Setup Jumper Location
4.5.7 CompactFlash® Voltage Selection
WARNING:
Incorrect voltages can destroy the CF card. Make sure to select a
voltage that matches the voltage required by the CF card.
Jumper Label: JVCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-8
Jumper Location: See Figure 4-8
The CompactFlash® voltage selection jumper sets the voltage of the power supplied to
the CF card.
Setting Description
Open +3.3 V (Default)
Short +5.0 V
Table 4-8: CompactFlash® Voltage Selection Jumper Settings