IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 73)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 60
Step 1: Locate the dual PS/2 connector. The location of the PS/2 connector is shown
in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert the PS/2 connector on the end
of the PS/2 y-cable into the external PS/2 connector. See Figure 4-17.
Figure 4-17: PS/2 Keyboard/Mouse Connector
Step 3: Connect the keyboard and mouse. Connect the keyboard and mouse to the
appropriate connector. The keyboard and mouse connectors can be
distinguished from each other by looking at the small graphic at the top of the
connector.
4.8.3 Serial Device Connection
The NANO-PV-D4251/N4551/D5251 has a single female DB-9 connector on the external
peripheral interface panel for a serial device. Follow the steps below to connect a serial
device to the NANO-PV-D4251/N4551/D5251.