IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 71)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 58
Figure 4-15: Single RS-232 Cable Installation
Step 3: Secure the bracket. The single RS-232 connector has two retention screws
that must be secured to a chassis or bracket.
Step 4: Connect the serial device. Once the single RS-232 connector is connected to
a chassis or bracket, a serial communications device can be connected to the
system.
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ Keyboard and mouse
ƒ RJ-45 Ethernet cable connector
ƒ Serial devices
ƒ USB devices
ƒ VGA monitor
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-PV-D4251/N4551/D5251 external peripheral interface
connector making sure the pins are properly aligned.