IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 65)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 52
4.5.9 LVDS Voltage Selection
WARNING:
Incorrect voltages can destroy the LCD panel. Make sure to select a
voltage that matches the voltage required by the LCD panel.
Jumper Label: J_VLVDS1
Jumper Type: 6-pin header
Jumper Settings: See Table 4-10
Jumper Location: See Figure 4-10
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.
Setting Description
1-2 +3.3 V (Default)
3-4 +5.0 V
5-6 +12 V
Table 4-10: LVDS Voltage Selection Jumper Settings
Figure 4-10: LVDS Voltage Selection Jumper Locations
4.5.10 PCI-104 Voltage Setup
Jumper Label: JP1
Jumper Type: 3-pin header