IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 72)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 59
4.8.1 LAN Connection (Single Connector)
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the NANO-PV-D4251/N4551/D5251. See Figure 4-16.
Figure 4-16: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
4.8.2 PS/2 Y-Cable Connection
The NANO-PV-D4251/N4551/D5251 has a PS/2 connector on the external peripheral
interface panel. The dual PS/2 connector is connected to the PS/2 Y-cable that came with
the NANO-PV-D4251/N4551/D5251. One of the PS/2 cables is connected to a keyboard
and the other to a mouse to the system. Follow the steps below to connect a keyboard and
mouse to the NANO-PV-D4251/N4551/D5251.