IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 75)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 62
Step 2: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
Figure 4-19.
Figure 4-19: USB Connector
4.8.5 VGA Monitor Connection
The NANO-PV-D4251/N4551/D5251 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the NANO-PV-D4251/N4551/D5251, please follow the
instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.