IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 94)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 81
5.3.6.1.5 Serial Port 4 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
Î
IO=2C0h;
IRQ=10
Serial port I/O port address is 2E8h and the interrupt
address is IRQ10
Î
IO=2C0h;
IRQ=10, 11
Serial port I/O port address is 2C0h and the interrupt
address is IRQ10, 11
Î
IO=2C8h;
IRQ=10, 11
Serial port I/O port address is 2C8h and the interrupt
address is IRQ10, 11
Î
IO=2D0h;
IRQ=10, 11
Serial port I/O port address is 2D0h and the interrupt
address is IRQ10 and IRQ11
Î
IO=2D8h;
IRQ=10, 11
Serial port I/O port address is DC8h and the interrupt
address is IRQ10 and IRQ11
Î
IO=2E0h;
IRQ=10, 11
Serial port I/O port address is 2E0h and the interrupt
address is IRQ10 and IRQ11