IEI Integration uIBX-200 v1.02 - Manual (Page 37)

uIBX-US15WP Embedded System
Page 28
Pin Description Pin Description
7 GND 8 GND
9 VCC / NC 10 GND
11 NC 12 DDC DAT
13 HSYNC 14 VSYNC
15 DDCCLK
Table 4-8: VGA Connector Pinouts
4.6 Mounting the System
To install the uIBX-US15WP on the VESA mounting slot, between the monitor stand and
the monitor, follow the instructions below.
4.6.1 Mounting Option 1
Step 1: If the mounting pattern on the panel PC is VESA 100 mm then the adapter must
be attached.
Figure 4–16: 100 mm to 75 mm Adapter