IEI Integration uIBX-200 v1.02 - Manual (Page 92)

uIBX-US15WP Embedded System
Page 83
A.4.1 Factory Restore
To restore the factory default image, please follow the steps below.
Step 1: Type <1> and press <Enter> in the main menu.
Step 2: The Symantec Ghost window appears and starts to restore the factory default. A
factory default image called iei.GHO is created in the hidden Recovery partition.
Figure A-24: Restore Factory Default
Step 3: The screen is shown as in Figure A-25 when completed. Press any key to
reboot the system. S te p 0 :
Figure A-25: Recovery Complete Window