IEI Integration uIBX-200 v1.02 - Manual (Page 90)

uIBX-US15WP Embedded System
Page 81
Step 7: The recovery tool menu appears. (Figure A-22)
Figure A-22: Recovery Tool Menu
Step 8: Create a factory default image . Follow Step 2 ~ Step 12 described in Section
A.2.5 to create a factory default image. S te p 0 :
A.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.