IEI Integration uIBX-200 v1.02 - Manual (Page 76)

uIBX-US15WP Embedded System
Page 67
NOTE:
The recovery CD can only be used with IEI products. The software will fail
to run and a warning message will appear when used on non-IEI hardware.
A.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore system, a few setup procedures are
required.
Step 1: Hardware and BIOS setup
Step 2: Create partitions
Step 3: Install operating system, drivers and system applications.
Step 4: Build-up recovery partition
Step 5: Create factory default image S te p 0 :
The detailed descriptions are described in the following sections.