IEI Integration uIBX-200 v1.02 - Manual (Page 54)

uIBX-US15WP Embedded System
Page 45
Î
Disabled
Prevents the BIOS from using 32-bit data transfers.
Î
Enabled D EFAULT
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
5.3.3 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8]
Serial Port2 Address [2F8]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
ƒ Serial Port1 Address [3F8]
Sets the port address of serial port 1.
ƒ Disabled
ƒ 3F8 D EFAULT
ƒ 2F8
ƒ 3E8
ƒ 2E8
ƒ Serial Port1 IRQ [4]
Sets the interrupt request for serial port 1.