IEI Integration uIBX-200 v1.02 - Manual (Page 89)

uIBX-US15WP Embedded System
Page 80
system32> format N: /fs:ntfs /q /v:Recovery /y
system32> exit
Step 4: Build-up recovery partition . Press any key to boot from the recovery CD. It will
take a while to launch the recovery tool. Please be patient. When the recovery
tool setup menu appears, type <3> and press <Enter> (Figure A-20). The
Symantec Ghost window appears and starts configuring the system to build-up a
recovery partition. After completing the system configuration, press any key to
reboot the system. Eject the recovery CD.
Figure A-20: System Configuration for Linux
Step 5: Access the recovery tool main menu by modifying the “menu.lst” . To first
access the recovery tool main menu, the menu.lst must be modified. In Linux
system, enter Administrator (root). When prompt appears, type:
cd /boot/grub
vi menu.lst
Figure A-21: Access menu.lst in Linux (Text Mode)
Step 6: Modify the menu.lst as shown below.