Figure 3-1: bottom panel retention screws, Figure 3-2: hdd bracket retention screws – IEI Integration TANK-700-QM67 v1.00 User Manual
Page 28
Advertising
TANK-700 Embedded System
Page 17
Figure 3-1: Bottom Panel Retention Screws
Step 2:
Remove the 2 HDD bracket retention screws (Figure 3-2).
Figure 3-2: HDD Bracket Retention Screws
Step 3:
Lift the HDD bracket out of the TANK-700 and put it on a flat surface.
Step 4:
Attach the HDD to the HDD bracket. Secure the HDD with the HDD bracket by
four retention screws (Figure 3-3).
Advertising