IEI Integration TANK-700-QM67 v1.00 - Manual (Page 34)

TANK-700 Embedded System
Page 23
Figure 3-10: SO-DIMM Socket
Step 4: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket (Figure 3-11
8
).
Step 5: Push the SO-DIMM into the socket at an angle (
84
Figure 3-11 ).
Figure 3-11: SO-DIMM Installation
Step 6: Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM down (
84
Figure 3-11 ).
Step 7: Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM in the socket.