IEI Integration TANK-700-QM67 v1.00 - Manual (Page 68)

TANK-700 Embedded System
Page 57
Î SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to enable or disable the SATA controller.
Î
Enabled D EFAULT
Enables the on-board SATA controller.
Î
Disabled Disables the on-board SATA controller.
Î SATA Mode Selection [IDE]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.
Î
IDE D EFAULT
Configures SATA devices as normal IDE device.
Î
AHCI
Configures SATA devices as AHCI device.
Î
RAID Configures SATA devices as RAID device.
4.3.5 USB Configuration
Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
USB Support [Enabled]
Legacy USB2.0 Support [Enabled]
Legacy USB3.0 Support [Enabled]
USB Support Parameters
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 7: USB Configuration
Î USB Devices
The USB Devices field lists the USB devices that are enabled on the system