IEI Integration TANK-700-QM67 v1.00 - Manual (Page 32)

TANK-700 Embedded System
Page 21
Figure 3-7: Pluggable Remote Control Terminal Block Installation
3.6 SFP Module Installation
To install an SFP module, please follow the steps below:
Step 1: Locate the SFP fiber connectors. The locations of the connectors are shown in
Figure 1-3 .
Step 2: Align the SFP module with one of the SFP fiber connectors on the TANK-700
(Figure 3-8).
Step 3: Once aligned, slide the SFP module into place (Figure 3-8).
Figure 3-8: SFP Module Installation