IEI Integration PPC-37xx-N270 v2.00 - Manual (Page 47)

PPC-37xx-N270 Panel PC
Page 33
Step 4: Insert the CF card . Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 4-4. Step 0:
Figure 4-4: CF Card Installation
4.8 HDD Installation
4.8.1 PPC-3708 HDD Installation
To install the HDD into the PPC-3708, please follow the steps below:
Step 1: Remove the back cover. Refer to Section 4.5.1.
Step 2: Remove the HDD bracket from the PPC-3708. The HDD bracket is attached on
the PPC-3708 with four retention screws, two on the top panel (Figure 4-5) and
two inside the chassis (Figure 4-6). Remove the four retention screws and lift
the bracket off the panel PC.