IEI Integration PPC-37xx-N270 v2.00 - Manual (Page 64)

PPC-37xx-N270 Panel PC
Page 50
Figure 4-22: Secure the Chassis
4.11.2 Panel Mounting
4.11.2.1 PPC-3708A-N270 and PPC-3710A-N270
To mount the PPC-3708A-N270 or PPC-3710A-N270 flat panel PC into a panel, please
follow the steps below.
Step 1: Select the position in the panel to mount the panel PC.
Step 2: Cut out a section from the panel that corresponds to the dimensions of the flat
panel PC chassis. The panel section that is cut out must be smaller than the size
of the aluminum frame that surrounds the TFT LCD panel but just large enough
for the chassis to fit through. Refer to Figure 4-23 and Figure 4-24 for the
suggested cut out size.