3 serial device connection, Figure 4-34: lan connection – IEI Integration PPC-37xx-N270 v2.00 User Manual
Page 73
PPC-37xx-N270 Panel PC
Page 59
Step 1:
Locate the RJ-45 connectors
on the bottom panel of the PPC-37xx-N270.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the PPC-37xx-N270. See
Figure 4-34: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.
Step 0:
4.12.3 Serial Device Connection
The PPC-37xx-N270 has two single male DB-9 connectors on the bottom panel for a
serial device. Follow the steps below to connect a serial device to the PPC-37xx-N270
panel PC.
Step 1:
Locate the DB-9 connector
. The location of the DB-9 connector is shown in
Chapter 2
.
Step 2:
Insert the serial connector
.
Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 4-35.