IEI Integration PPC-37xx-N270 v2.00 - Manual (Page 55)

PPC-37xx-N270 Panel PC
Page 41
Description Label Type
AT Power Mode Setting ATXCTL1 2-pin header
CF Card Setting JCF1 2-pin header
Clear CMOS J_CMOS1 3-pin header
COM2 Mode Setting JP1 6-pin header
Table 4-1: Jumpers
4.10.1 Access the Jumpers
To access the jumpers, remove the back panel. To remove the back panel, please refer to
Section 4.5 .
4.10.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system.
The following jumpers are preconfigured for the PPC-37xx-N270. Users should no change
these jumpers (Table 4-2).
Jumper Name Label Type
LVDS voltage selection J_VLVDS1 3-pin header
LVDS2 Voltage Select J_VLVDS2 3-pin header
Panel Type and Resolution J_LCD_TYPE1 8-pin header
Table 4-2: Preconfigured Jumpers