IEI Integration PPC-37xx-N270 v2.00 - Manual (Page 71)

PPC-37xx-N270 Panel PC
Page 57
Figure 4-32: Install into a Rack/Cabinet
Step 5: Once the flat panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (Figure 4-32).
4.11.4.2 PPC-3710A-N270 and PPC-3712A/B-N270
Step 1: The back of the aluminum frame surrounding the LCD screen has retention
screw holes (PPC-3710A-N270 has 10 holes and PPC-3712A/B-N270 has 8
holes) for a cabinet/rack installation bracket.
NOTE:
When purchasing the cabinet/rack installation bracket make sure it is
compatible with both the flat panel PC and the rack/cabinet into which
the panel PC is installed.