3 arm mounting, Figure 2-11: tighten the in-wall mounting screws, Figure 2-12: faceplate installation – IEI Integration ACT-457A User Manual
Page 31
Advertising

ACT-457A Panel PC
Page 23
Step 7:
Tighten the screws that pass through the wall mounting screw holes until the
screws are firmly secured to the wall.
Figure 2-11: Tighten the In-wall Mounting Screws
Step 8:
Install the faceplate. Snap faceplate onto the ACT-457A frame.
S
te
p
0
:
Figure 2-12: Faceplate Installation
2.7.3 Arm Mounting
The ACT-457A can be mounted on a VESA compliant 75 mm x 75 mm connector.
Step 1:
The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
Advertising