4 get mifare parameter, Figure 3-6: get mifare parameter, Table 3-8: set mifare parameter response format – IEI Integration ACT-457A User Manual
Page 46: Figure 3-4 ), Figure 3-4, Ed in table 3-5 and table 3-6
Advertising
ACT-457A Panel PC
Page 38
Status (2 digits)
Block Data
END (2 digits)
OK Null
CR,LF
(0x0d,0x0a)
ER
Error Code (3 digits)
CR,LF (0x0d,0x0a)
Table 3-8: Set Mifare Parameter Response Format
3.5.4 Get Mifare Parameter
To read the parameter of a Mifare card reader, please follow the steps below.
Step 1:
Select Get Mifare Parameter in the command area (Figure 3-6).
Step 2:
Click the Execute button to execute the command through the selected serial
port (Figure 3-6). The raw data of this command shows in the Raw Data area in
the format listed in Table 3-9 and Table 3-10.
Step 0:
Figure 3-6: Get Mifare Parameter
Field
Command
End
Digit 2
1
Advertising