IEI Integration ACT-457A - Manual (Page 54)

ACT-457A Panel PC
Page 46
A.1 Introduction
Pin out signal definitions for the external connectors are provided in this appendix.
A.2 Digital I/O Connector
The Digital I/O connector on the bottom panel has the following pinouts.
Pin Description
1 VCC
2 GND
3 DO0
4 DO1
5 DI0
6 DI1
Table A-1: Digital I/O Connector Pinouts
A.3 External SATA Connector
The ACT-457A has one external SATA connector on the rear panel.
Pin Description
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
8 GND
9 GND
Table A-2: External SATA Connector Pinouts
A.4 LAN Connector
The ACT-457A has two RJ-45 connectors to provide GbE connectivity.