1 calibrating the touch screen, Figure 7-22: penmount monitor icon, Figure 7-23: penmount monitor popup menu – IEI Integration AFL2-12A-D525 User Manual
Page 119
Advertising
AFL2-12A-D525 Series Panel PC
Page 119
7.6.1 Calibrating the Touch Screen
To calibrate the touch screen cursor with the motion of the touch screen pen (or finger),
please follow the steps below:
Step 1:
Make sure the touch screen driver is properly installed.
Step 2:
Locate the PenMount Monitor icon in the bottom right corner of the screen.
Figure 7-22: PenMount Monitor Icon
Step 3:
Click the icon. A pop up menu appears. See Figure 7-23.
Figure 7-23: PenMount Monitor Popup Menu
Step 4:
Click Control Panel in the pop up menu shown in Figure 7-23.
Step 5:
The configuration screen in Figure 7-24 appears.
Advertising