Figure 4-11: chassis support screws – IEI Integration AFL2-12A-D525 User Manual
Page 51
Advertising
AFL2-12A-D525 Series Panel PC
Page 51
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 4-11).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 4-11: Chassis Support Screws
Step 9:
Secure the panel PC by fastening the retention screw of the wall-mounting
bracket. (Figure 4-12).
Step 0:
Advertising