IEI Integration AFL2-12A-D525 - Manual (Page 56)

AFL2-12A-D525 Series Panel PC
Page 56
Step 4: Slide the flat bezel panel PC with the attached rack/cabinet bracket into a rack or
cabinet (Figure 4-17).
Figure 4-17: Install into a Rack/Cabinet
Step 5: Once the flat bezel panel PC with the attached rack/cabinet bracket has been
properly inserted into the rack or cabinet, secure the front of the rack/cabinet
bracket to the front of the rack or cabinet (Figure 4-17). Step 0:
4.10 Bottom Panel Connectors
4.10.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors on the bottom panel of the AFL2-12A-D525.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL2-12A-D525. See Figure
4-18.