IEI Integration AFL2-12A-D525 - Manual (Page 48)

AFL2-12A-D525 Series Panel PC
Page 48
ƒ ATM
ƒ Self-service kiosk
ƒ Plant environment monitoring system
ƒ Factory automation platform
ƒ Manufacturing shop flow
4.6.2 ATX Power Mode
With the ATX mode selected, the AFL2-12A-D525 panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
ƒ Security surveillance
ƒ Point-of-Sale (POS)
ƒ Advertising terminal
4.7 Powering On the System
To power on the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.
Step 2: Hold down the Function and Brightness Up buttons for three seconds to power
on the system. Step 0:
4.8 Powering Off the System
To power off the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.
Step 2: Hold down the Function and Brightness Up buttons for six seconds to power off
the system. Step 0: