C.7 other information, Ther, Nformation – IEI Integration AFL2-12A-D525 User Manual
Page 171
AFL2-12A-D525 Series Panel PC
Page 171
C.7 Other Information
C.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller
When the system uses AHCI mode or some specific SATA controllers such as ALi M5283
or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key
recovery. Please follow the steps below to install the SATA RAID/AHCI driver.
Step 24:
Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into
a USB floppy disk drive. The SATA RAID/AHCI driver must be especially
designed for the on-board SATA controller.
Step 25:
Connect the USB floppy disk drive to the system.
Step 26:
Insert the One Key Recovery CD into the system and boot the system from the
CD.
Step 27:
When launching the recovery tool, press <F6>.