Zanussi FE 1014 N - Manual (Page 16)

4. Switch the machine on
To switch the machine on, press the ON/OFF button
: the mains-on light comes on.
5. Select the desired programme/
fabric
Press the FABRIC button repeatedly, in order to
select the desired programme/fabric. The relevant
light will light up.
The lights relevant to the phases that form the
programme will light up.
The START/PAUSE button light will start flashing.
6. Select the temperature
Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine.
The relevant light will light up.
60°C
40°C
95°C
30°C
TE
M PERATU RE
COLD
SYNTHETICS
DELICATES
COTTONS
WOOL
FABRICS
ON / OFF
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
.
3. Measure out the additives
If required, pour fabric softener into the
compartment marked
without exceeding the
«MAX» mark.
C0071 C0070
P0004
16
132996790.qxd 10/12/01 12:20 PM Pagina 16 (Nero/Process Black pellicola)